Kodak V530 - Manual (Page 25)

Doing more with your camera
www.kodak.com/go/support 19
Changing the flash settings
For flash settings in each mode, see page 53 .
Flash modes Flash fires
Auto
Flash When the lighting conditions require it.
Fill Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is “backlit” (when light is behind the
subject). In low light, hold the camera steady or use a tripod.
Red-eye Once, so the subject’s eyes become accustomed to the flash, then fires
again when the picture is taken. (If the lighting conditions require flash
but do not require Red-eye reduction, the flash may fire only once.)
Off Never
Press the flash button repeatedly to
scroll through flash modes.
The current flash mode is shown in
the LCD status area.