Kodak 8800 - Manual (Page 12)

1-8 4J2007 July 2006
Setting Up the Printer
Connecting the Cables
Connecting the power
cable You may have received more than one power cable with your printer. Be sure
to use the correct power cable required for your country.
1. Check that the power switch is turned off ( ).
CAUTION :
The power outlet must be grounded. An ungrounded outlet can
cause fire, electric shock, or harmful interference to nearby
electrical devices.
2. Connect the power cable to the power connector on the back of the
printer and to a grounded power outlet.
Connecting the USB
cable Use the included USB cable.
1. Check that the power switch is turned off ( ).
2. Connect the USB cable to the USB connector on the back of the printer
and to the USB connector on the computer.
Turning On the Printer
1. Press the power switch to on ( | ).
On the operator panel, the orange Power light and the green Ready
light illuminate, and the Ready message appears when the printer is
initialized.
2. To turn off the printer, press the power switch to off ( ).
ON
OFF