Alpine eX-10 - Manual (Page 6)

Twist the supplied round plastic plate to the
base of the eX‐10’s display, and attach the
supplied double‐sided tape to this plate.
Clean the dash area where the eX‐10’s
display will be mounted with the supplied
alcohol pad.
Remove the backing from the
double‐sided tape, and attach
it to the dash by pressing
firmly*.
Connect the monitor cable to
the display base, and route the
monitor cable to the desired
location for the eX‐10’s
power supply using the
supplied cable clamps
Installation Instructions
Step 3: Mount the eX‐10’s display
*Note: There are many custom‐mounting options for the eX‐10’s display; refer to the Alpine Dealer Ad
Center for a step‐by‐step tutorial showing how to build a custom A‐pillar display mount.
Page 6