Alpine eX-10 - Manual (Page 3)

Installation Instructions
Option #1: Use the factory AUX input .
Purchase a 1/8” phono‐to‐phono
jack cable to connect the eX‐10 to
the factory AUX input. Part # 42‐2607
from Radio Shack is a good example.
Plug one end of the cable into the
vehicle’s factory AUX port.
Plug the other end of the 1/8” phono cable into
The “aux out” port on the eX‐10’s power supply.
Select “AUX” as a source to hear iPod or Bluetooth
output from the vehicle’s sound system.
Page 3
Skip to Page 5 to continue the installation>>>
Step 1: Input into the factory radio