Alpine eX-10 - Manual (Page 4)

Option #2: Use the Alpine KWE-155B FM splitter .
Purchase the Alpine KWE‐155B
FM splitter.
Remove the vehicle’s
factory radio, and unplug the
antenna connection.
Plug the factory antenna connector
into the port marked “car antenna”
on the KWE‐155B FM splitter.
Plug the antenna lead marked “car
audio” into the factory radio’s antenna
input.
Route the lead marked “eX‐10” to the
desired location for the eX‐10’s power
supply, and re‐install the factory radio.
Page 4
Installation Instructions
Step 1: Input into the factory radio