Alpine eX-10 - Manual (Page 5)

Attach the Bluetooth microphone to the
microphone mounting clip by pushing
the microphone onto the clip as shown
Clip the microphone mount to a spot in the
car no more than 24” from the customer’s
mouth.
Good locations include the
sun visor, the top of the A‐pillar, and the edge
of the roof‐mounted center console (if
equipped)* .
Route the microphone cable to the desired
location for the eX‐10’s power supply.
*Note: Do not install the microphone in any position where it could interfere with the functionality of
airbags in the vehicle.
Installation Instructions
Step 2: Mount the Bluetooth microphone
Page 5