Vollrath Mix60-Water Cooled - Manual (Page 17)

English
Operating instructions
17
CARRY OUT THE CLEANING OF THE DEVICE FOLLOWING THESE PROCEDURES:
1 Simple washing
- Ensure the tap is closed.
- For models Mix60- 109a and Mix 60 - 309a pour a solution consisting of 4 oz of detergent suitable for use with food
preparation equipment in 8 gallons of hot water (104°F/40°C) into the tank.
- For model Mix 120- 109a pour a solution consisting of 8 oz of detergent suitable for use with food preparation equipment
in 4 gallons of hot water (104°F/40°C) into the tank.
- Clean all the tank surfaces and lid, using sterile, disposable material or a suitable brush. Before emptying the tank,
press the stir button [K6] and allow the machine to run for 3 minutes.
- Rotate the drip tray to one side, position a container under the tap and open it to empty the tank.
- Rinse the tank with water at room temperature.
- With the tap still open, press the tap wash button until the water comes out clear.
2 Complete washing and disassembling of the parts
CARRY OUT THESE OPERATIONS ONLY WITH THE MAIN CIRCUIT BREAKER TURNED OFF (“0”).
- Remove the rod [25] from the lid’s hinge and remove the lid [5].
- Remove the impeller cover [9] and the impeller [7].
- Loosen the knurled knob [16] and remove the tap from the port [3]. Unscrew the andle [15], remove the tap cover [14]
and remove the piston [13] from the tap body [12] and the seals [G] (see section 8. 1).