Argus Camera RW-1 - Manual (Page 67)

67
CONNECTING TO EXTERNAL EQUIPMENT
Connecting to a Television
Images being displayed on the camera’s monitor screen,
whether for recording or playback can also be displayed on
the screen of a connected television. Connect the camera to
a TV as illustrated below.
1. Use the video cable to connect the camera to
the television as shown in the illustration.
2. Perform the required operation on the TV to set
it up for video input.
¥ See the documentation that comes with your televi-
sion for information about how to do this.
3. Perform normal playback and recording opera-
tions on the camera.
IMPORTANT!
¥ The monitor screen turns off automatically during
video output.
INPUT
VIDEO L R
AUDIO
TV
VIDEO IN
terminal
VIDEO OUT
terminal
Video cable
(Bundled with
camera.)
Selecting the Video Output Signal Mode
Your camera supports both NTSC (used in U.S., Japan, and
other countries) and PAL (used in Europe and other areas)
video output signal systems. The video system you should
use depends on the country of origin of the equipment you
are connecting to the camera’s VIDEO OUT terminal.
¥¼©R¦W-9 2002/6/18, AM 11:44 Page 67 Adobe PageMaker 6.5C/Win