Argus Camera RW-1 - Manual (Page 27)

27
RECORDING IMAGES
This section describes the basic procedure for recording an
image.
Recording a Simple Snapshot
Your camera automatically adjusts shutter speed and aper-
ture setting in accordance with the brightness of the subject.
Recorded images can be saved to the camera’s built-in
flash memory or to a commercially available memory card
(SD memory card or MultiMediaCard).
1. Slide the POWER ON/OFF
switch to the right to turn
on the camera.
This causes an image or a
message to appear on the
monitor screen.
2. Align the mode selector with
LCD.
The following describes the different settings that are
available with the mode selector.
RECORDING IMAGES
POWER ON/OFF
Mode selector
To do this:
Enter the REC mode with the
monitor screen turned off, so you
can use the optical viewfinder to
compose images, which
conserves battery power
Enter the PLAY mode and display
images on the monitor screen
Enter the REC mode with the
monitor screen turned on, so you
can use it to compose image
Align the mode selector
with this setting:
FINDER
LCD
¥¼©R¦W-4 2002/6/18, AM 11:11 Page 27 Adobe PageMaker 6.5C/Win