Vollrath KDC1418-4F-06 Acrylic Knock Down Bakery Display Cases - Manual (Page 2)

www.Vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 920.457.4851
Fax: 800.752.5620
Technical Services: 800.628.0832
Service Fax: 920.459.5462
Canada Service: 800.695.8560
© 2014 The Vollrath Company, L.L.C.
5. With rails facing inward, gently attach opposite side panel (E) to display
using (6) machine screws (A). See Figure 4.
E
A
Figure 4. Install Opposite Side Panel
6. Carefully place back panel (J) on case and attach using (4) machine screws
(A). See Figure 5.
J
A
Figure 5. Install Front Panel
CAUTION
DO NOT overtighten screws and hardware.
7. Attach clear handles (C) to four front door panels (H) using machine screws
(A) and self-locking nuts (B). See Figure 5.
C
H
B
A
Figure 5. Install Handles
8. Connect (4) front door panels (H) to side panels (E) using clear post and
screw sets (D). See Figure 6.
E
H D
Figure 6. Install Front Door Panels
9. Open front doors, and install trays.
10. Clean using very soft cloth and clean water. Avoid abrasive chemical and
glass cleaners, ie: Windex ® , Simple Green ® . Clean using warm water and a
dilute mild dish soap (Dawn ® or Joy ® ). Wipe acrylic lightly using soap mixture
and rinse with plain water using a soft cloth. A microfiber towel or clean
chamois is preferred. DO NOT USE PAPER TOWELS!