Vollrath KDC1418-2-06 Acrylic Knock Down Bakery Display Cases - Manual (Page 2)

www.Vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 920.457.4851
Fax: 800.752.5620
Technical Services: 800.628.0832
Service Fax: 920.459.5462
Canada Service: 800.695.8560
© 2014 The Vollrath Company, L.L.C.
4. Repeat the process attaching the large flat bottom panel (G) using (3)
machine screws (A). See Figure 3.
A
G
Figure 3. Install Large Flat Bottom Panel
5. With rails facing inward, gently attach opposite side panel (E) to display
using (6) machine screws (A). See Figure 4.
A
E
Figure 4. Install Opposite Side Panel
CAUTION
DO NOT overtighten screws and hardware.
6. Attach clear handles (C) to front door panels (H) and hinged rear panel
(door) using machine screws (A) and self-locking nuts (B). See Figure 5.
C
H
B
A
Figure 5. Install Handles
7. Connect (2) front door panels (H) to side panels (E) using clear post and
screw sets (D). See Figure 6.
E
H D
Figure 6. Install Front Door Panels
8. Open each front door and install trays.
9. Clean using very soft cloth and clean water. Avoid abrasive chemical and
glass cleaners, ie: Windex ® , Simple Green ® . Clean using warm water and a
dilute mild dish soap (Dawn ® or Joy ® ). Wipe acrylic lightly using soap mixture
and rinse with plain water using a soft cloth. A microfiber towel or clean
chamois is preferred. DO NOT USE PAPER TOWELS!