TRITTON Combat Rudder Pedals Pro Flight - Manual (Page 8)

5. At the Driver Setup screen, if you haven’t already done so, plug the USB cable into
one of your computer’s USB ports and then click Next.
6. At the Driver Setup screen, click Next to test your controller.
7. When the Saitek Controller screen appears, try out all of your controller’s controls to
determine if it is working properly. When you have finished, click OK.
8. In the following Software Setup screen, click Next and a pop-up box will appear
asking if you “want to trust software from Saitek.” Click yes, and then click Next. The
installation will automatically continue until the Registration screen appears.
9. At the Registration screen, select Check this box to register now and follow the on-
screen instructions, or do not select this option and register later.
10. Upon completion of the installation, you have the option to Run Profile Editor,
which will give you a view of the programming environment. If you do not wish to see
the Profile Editor at this point, uncheck the box and click on Finish to complete the
installation.
ENabLING Your coNtroLLEr IN GamES
Most games support game controllers, which you can enable by using the [control]
options menu within the Main Menu of the game itself. If you are having trouble with
this, or are not sure if the game supports game controllers, please refer to the game’s
user manual for assistance.
SEtuP IN fLIGHt SIm x aNd fLIGHt SIm 2004
The Rudder Pedals have three axes, one for the rudder and two foot pedal axes that
are used for the toe brakes. There is also a rotary wheel in the center that allows for the
rudder movement’s tension to be increased and decreased. Due to the way in which
Flight Sim detects the pedals, they need to be correctly configured before you can start
getting the most out of them.
Start by opening FSX and going to Settings > Controls > Control Axes. Select the
Rudder Pedals in Controller Type. Double-click the Event Brake (left axis) and depress
8