TotalPond MF750UV User Manual
Page 3
3
DISASSEMBLY PROCEDURE
In order to insure optimal operation of the Pond Boss™, the following procedures should be performed
periodically. When the performance of the water flow through the fountain head is reduced – it is an
indication that cleaning of the unit is needed.
1. Unplug the power cord, and then carefully remove the Pond Boss™
assembly from the pond. Fig. 4
Fig. 4
2. Turn the Pond Boss™ assembly upside down. Remove the locking
screw. Fig. 5
Fig. 5
3. Remove the fountain head and the top locking nut. Then remove the
top cover. Fig. 6
Fig. 6
4. Twist the top section counterclockwise. Then pull the top section from
the lower. Unscrew the wire connector that connects the top section to
the rest of the unit. Fig. 7
Fig. 7