TotalPond MF750UV User Manual
Page 2
2
•
DANGER – ULTRAVIOLET RADIATION – disconnect power before replacing lamp.
•
Prolonged or repeated exposure to UV light may have adverse physical effects including, severe
damage to your skin and eyes. Seek immediate medical attention for overexposure to UV radiation.
•
This light assembly has not been investigated for use in swimming pools or hot tubs.
PREPARATION
Before beginning assembly or operation of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to assemble,
install or operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 5 minutes
•
Tools Required for Assembly: Philipshead screwdriver, string, rock.
OPERATION INSTRUCTIONS
1. Choose a fountain head for the desired water effect, and assemble
your choice as shown in Fig. 1.
Fig. 1
2. If desired, anchor the Pond Boss™ in the pond using a heavy object
(such as a rock) and some string. Cut a length of string slightly longer
than the depth of the pond. Tie one end of the string to the anchor and
the other end to the ring at the bottom of the float. Fig. 2
Fig. 2
3. Place the Pond Boss™ into the water and connect to a proper power
source. Fig. 3
Fig. 3
GFCI
C
E
B
D
E