TotalPond PVC12005 - Manual

1
ITEM # PVC12005
7 ft. x 10 ft. Pond Skins
PACKAGE CONTENTS
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement parts.
•
Estimated Assembly Time: 2 hours
•
Tools Required for Assembly: Garden hose, Shovel.
NOTES
Calculate the dimensions of your pond. Your pond should be at least 18in. deep at the deepest point.
Allow for a 10 in. overlap around the perimeter of the pond. The 7 ft. x 10 ft. liner will create a pond that is
approximately 3 ft. x 6 ft. x 18in.deep. It will hold approximately 200 gal. of water.
INSTALLATION INSTRUCTIONS
1. Use sand to mark the outline of your pond. Fig. 1
Fig. 1
Part Description Quantity
A Liner 1
Questions, problems, missing parts? Before returning
to your retailer, call our customer service department at
1-888-412-6001, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at [email protected]. Or
visit our website www.totalpond.com.
REMINDER
CALL 1-888-412-6001
BEFORE RETURNING TO STORE.