MyWeigh CIGARETTE CASE SCALE - Manual (Page 2)

CIGARETTE CASE SCALE
OPERATION AND CALIBRATION INSTRUCTIONS
This scale is very easy to operate. However, there are certain caring and
operation instructions you should read before your first use We know taking
the time to read these instructions is time consuming, but this scale is a
precision instrument and must be handled with the upmost care.
IMPORTANT:
1) To open the scale, simply press the unlock button and lift up the cover.
2) Always empty the platform before turning the power on (clear the platform
before turning on).
3) Do not get the scale wet or hot and do not operate on any wet or hot
surface. To clean the scale, wipe the surface with a clean damp cloth or
mild non-abrasive cleaner. Do not use any abrasive cleaner because it may
damage the finish.
4) Do not overload the scale. That is, do not place anything that weighs
more than 300 grams on the platform. You may permanently damage the
load cell.
5) Handle the scale with care. This is a precision instrument and should never
be dropped or otherwise mishandled.
6) Do not leave anything on the scale when not is use.
7) If the scale is excessively cold or hot, allow the scale to warm up to normal
room temperature for at least 1 hour prior to use.
8) Do not operate a cell phone or cordless phone within 10 feet of the
scale**** It may temporarily cause the scale to malfunction.
9) If the scale ever reads “Lo” or weighs very slowly, please replace the
batteries.
10) In the unlikely event that the scale permanently “locks up” or shows ERR,
visit www.myweigh.com for Advanced Troubleshooting.
11) If your scale should require recalibration, please refer to the calibration
guide on the next page.
12) Please keep your scale in it’s protective pouch when not in use.