MyWeigh Palmscale 8.0 User Manual

Page 6

Remember: You can permanently damage the scale and void your warranty by
overloading it!

Negative Value

Any tared value or a value left in memory will be removed from the tray. Press

or cycle

the power to re-Zero the unit.

NOTE: The display will show

If a negative weight is lower than the negative

range of the scale.

TROUBLESHOOTING & OPERATION NOTES:

1) If the Display ever becomes locked on "unSt", this indicates that the scale is unstable, please
place it on a stable surface to use. If the Display ever becomes

locked on

this indicates that the following:

A) The weight on the pan is out of the range of Zero. please remove the weight then power OFF.

B) The scale was shocked, dropped or otherwise damaged and the delicate weighing sensors
have been damaged. You can try recalibrating the scale (If the sensor has not been hurt too badly
it will work again after recalibration). Otherwise you will have to follow the warranty
instructions that came with your scale.

2) If the display is faint or the scale won't power on, This often indicates low batteries. If new
batteries do not fix this error the scale will have to be sent to us for replacement under our
Warranty.

For more information or more troubleshooting visit