MSI MS-91E2 - Manual (Page 36)

3-2
BIOS Setup
▍
MS-91E2
BIOS Setup
▍
MS-91E2
e
NteriNg
s
etup
Power on the computer and the system wll start POST (Power On Self Test)
process. When the message below appears on the screen, press or
key to enter Setup.
Press or to enter SETUP
If the message dsappears before you respond and you stll wsh to enter Setup,
restart the system by turnng t OFF and On or pressng the RESET button. You
may also restart the system by smultaneously pressng , , and
lete> keys.
Important
The tems under each BIOS category descrbed n ths chapter are under
contnuous update for better system performance. Therefore, the descrpton
may be slghtly dfferent from the latest BIOS and should be held for reference
only.
Upon boot-up, the 1st lne appearng after the memory count s the BIOS ver-
son. It s usually n the format:
A91E2IMS V1.0 093010 where:
1st digit refers to BIOS maker as A = AMI, W = AWARD, and
P = PHOENIX.
2nd - 5th digit refers to the model number.
6th digit refers to the chipset as I = Intel, N = NVIDIA, A = AMD and
V = VIA.
7th - 8th digit refers to the customer as MS = all standard customers.
V1.0 refers to the BIOS version.
093010 refers to the date this BIOS was released.
•
•