MSI MS-91E2 - Manual (Page 22)

2-4
Hardware Setup
▍
MS-91E2
Hardware Setup
▍
MS-91E2
CPU & Cooler Installation
When you are nstallng the CPU, make sure the CPU has a cooler attached on the top
to avod overheatng. Meanwhle, do not forget to apply some thermal paste on the CPU
before nstallng the heat snk/cooler fan for better heat dsperson.
Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll
cause damage to your CPU & manboard.
Open the load level. 1. Lift the load lever up and open the
load plate.
2.
The CPU socket has a plastic cap on
it to protect the contact from damage.
Before you install CPU, always cover
it to protect the socket pin. Romove
the cap from the lever hinge side (as
the arrow shows).
3. After confirming the CPU direction for
correct mating, put down the CPU in
the socket housing frame. Be sure to
grasp on the edge of the CPU base.
Note that the alignment keys are
matched.
4.
Alignment Key