MSI MS-91E2 - Manual (Page 21)

Hardware Setup
▍
MS-91E2
2-3
Hardware Setup
▍
MS-91E2
Cpu (C
eNtral
p
roCessiNg
u
Nit
)
When you are nstallng the CPU, make sure that you nstall the cooler to prevent
the CPU from overheatng. If you do not have the CPU cooler, consult your dealer
before turnng on the computer.
Important
Overheating
Overheating will seriously damage the CPU and system. Always make sure the
cooling fan can work properly to protect the CPU from overheating. Make sure
that you apply an even layer of thermal paste (or thermal tape) between the CPU
and the heatsink to enhance heat dissipation.
Replacing the CPU
While replacing the CPU, always turn off the power supply or unplug the power
supply’s power cord from the grounded outlet first to ensure the safety of CPU.
Introduction to LGA 1366 CPU
The pn-pad sde of LGA 1366 CPU. The surface of LGA 1366 CPU. Re-
member to apply some thermal paste
on t for better heat dsperson.
Alignment Key
Yellow trangle s the Pn 1 ndcator
Alignment Key
Yellow trangle s the Pn 1 ndcator