MSI MS-96D7 - Manual (Page 46)

3-14
BIOS Setup
▍
MS-96D7
BIOS Setup
▍
MS-96D7
Flow Control
Flow control s the process of managng the rate of data transmsson between
two nodes. It’s the process of adjusting the flow of data from one device to an-
other to ensure that the recevng devce can handle all of the ncomng data.
Ths s partcularly mportant where the sendng devce s capable of sendng
data much faster than the recevng devce can receve t.
Redirection After BIOS POST
Ths settng determnes whether or not to keep termnals?console redrecton
runnng after the BIOS POST has booted.
Terminal Type
To operate the system’s console redrecton, you need a termnal supportng
ANSI termnal protocol and a RS-232 null modem cable connected between
the host system and terminal(s). This setting specifies the type of terminal
devce for console redrecton.
VT-UTF8 Combo Key Support
Ths settng enables/dsables the VT-UTF8 combnaton key support for ANSI/
VT100 termnals.
Sredir Memory Display Delay
Use ths settng to set the delay n seconds to dsplay memory nformaton.
USB Configuration
Legacy USB Support
Set to [Enabled] f you need to use any USB 1.1/2.0 devce n the operatng
system that does not support or have any USB 1.1/2.0 drver nstalled, such
as DOS and SCO Unx. Set to [Dsabled] only f you want to use any USB
devce other than the USB mouse.
▶
▶
▶
▶
▶
▶
▶