Connector, Connector -10 – MSI MS-91F7 2011 User Manual

Page 22

2-10

Hardware Setup

▍

MS-91F7

Hardware Setup

▍

MS-91F7

Connector

Serial ATA Connector: SATA_0 ~ SATA_5

Ths connector s a hgh-speed Seral ATA nterface port. Each connector can

connect to one Seral ATA devce.

Important

Please do not fold the SATA cable into a 90-degree angle. Otherwise, data loss

may occur during transmission.

Fan Power Connector: CPUFAN0/1, SYSFAN1/2/3

The fan power connectors support system coolng fan wth +12V. When con-

nectng the wre to the connectors, always note that the red wre s the postve

and should be connected to the +12V; the black wre s Ground and should be

connected to GND. If the manboard has a System Hardware Montor chpset

onboard, you must use a specally desgned fan wth speed sensor to take ad-

vantage of the CPU fan control.

Important

Please refer to the recommended CPU fans at processor’s official website or

consult the vendors for proper CPU cooling fan.

PIN

SIGNAL

1
2
3
4

GND
+12V
Sensor
Control