Connectors, Connectors -12, Chapter 2 connectors – MSI H61MA-E35 (B3) User Manual

Page 26: Serial ata connector: sata1~4, sata5~6 (optional), Important, Chassis intrusion connector: jci1

2-12

Hardware Setup

MS-7740

Chapter 2

Connectors

Serial ATA Connector: SATA1~4, SATA5~6 (optional)

This connector is a high-speed Serial ATA interface port. Each connector can connect

to one Serial ATA device.

* The MB layout in this figure is for reference only.

SATA1~4 (3Gb/s)

supported by Intel

H61 (B3)

SATA5~6 (6Gb/s) (optional)

supported by ASMedia

ASM1061

SATA3

SATA5

SATA6

SATA4

SATA2

SATA1

Important

Please do not fold the Serial ATA cable into a 90-degree angle. Otherwise, data loss

may occur during transmission.

Chassis Intrusion Connector: JCI1

This connector connects to the chassis intrusion switch cable. If the chassis is opened,

the chassis intrusion mechanism will be activated. The system will record this status

and show a warning message on the screen. To clear the warning, you must enter the

BIOS utility and clear the record.

1.CIN

TRU

2.Gro

und