MSI X58A-GD45 - Manual (Page 56)

3-16
BIOS Setup MS-7522
Chapter 3
BIOS Setup MS-7522
Chapter 3
BIOS Setting Password
When you select this function, a message as below will appear on the screen:
U-Key
This item is used to enable/ disable USB driver device as a key.
Make U-Key at
This item appears when U-Key is set to Enabled, it can be used to specify the USB
driver device as a key.
Change Supervisor Password
This item is used to set the supervisor password.
Change User Password
This item is used to set the user password.
Important
Type the password, up to eight characters in length, and press . The password
typed now will replace any previously set password. You will be prompted to confirm the
password. Retype the password and press . You may also press to abort
the selection and not enter a password.
To clear a set password, just press when you are prompted to enter the pass-
word. A message will show up confirming the password will be disabled. Once the
password is disabled, the system will boot and you can enter Setup without entering
any password.
When a password has been set, you will be prompted to enter it every time you try to
enter Setup/ System. This prevents an unauthorized person from changing any part of
▶
▶
▶
▶