MSI X58A-GD45 - Manual (Page 52)

3-12
BIOS Setup MS-7522
Chapter 3
BIOS Setup MS-7522
Chapter 3
Power Management Setup
Important
S3-related functions described in this section are available only when the BIOS sup-
ports S3 sleep mode.
ACPI Function
This item is to activate the ACPI (Advanced Configuration and Power Management
Interface) Function. If your operating system is ACPI-aware, select [Enabled].
ACPI Standby State
This item specifies the power saving modes for ACPI function.
Power LED
This item configures how the system uses power LED to indicate the sleep state. The
settings are:
[Singal] The power LED remains the same color.
[Dual] The power LED changes its color to indicate the sleep state.
[Blinking] The power LED blinks to indicate the sleep state.
EuP 2013
This item is designed for Energy Using Products Lot 6 2013 (EuP) aka Energy Related
Products (ErP). To reduce Power Consumption when system off or standby mode.
Note: When “Enabled” EuP 2013 setting, system don’t support RTC wake up event
function.
S4/S5 PowerOn Wait (Sec)
This item allows you to select a waiting period when system wake-up from power state
S4/S5.
▶
▶
▶
▶
▶