MSI H97M-G43 - Manual (Page 84)

Chapter 3
3-26 BOIS Setup PB BIOS Setup
HARDWARE MONITOR
Current Temperature & Speed
information
Fan
control field
Voltage
display
Setting
Buttons
▶Current Temperature & Speed information
Shows the current CPU temperature, system temperature and fans' speeds.
▶Fan control field
This motherboard provides a fan speed control feature call “Smart Fan Mode”.
Please check the “Smart Fan Mode” to enable the Smart Fan Mode. Smart Fan Mode
automatically controls fan speed depending on the current CPU temperature and to
keep it with a specific operating speed. When the current CPU temperature is over/
under the setting temperature, the CPU/ system fan will run at the corresponding speed.
In this field, you can set the CPU/ system fan speed and the target temperatures by
moving the square.
Important
The changed settings will become effective after you save the changes and reboot the
system.
▶Function Buttons
[All Full Speed] Sets all CPU/ system fans to run at full speed.
[All Set Default] Sets all CPU/ system fans to run at default speed.
[All Set Cancel] Discards current all changes and restore to the previous values.
▶Voltage display
Shows the current voltages of CPU, system and memory.