MSI H97M-G43 - Manual (Page 75)

Chapter 3
3-16 BOIS Setup 3-17 BIOS Setup
confirm the password. You may also press to abort the selection.
To clear a set password, press when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
▶Trusted Computing
Sets TPM (Trusted Platform Module) function.
▶TPM SUPPORT [Disabled]
Enables or disables the TPM function to build the endorsement key for accessing
the system.
▶Chassis Intrusion Configuration
Press to enter the sub-menu.
▶Chassis Intrusion [Disabled]
This function will be available if the chassis equips a chassis intrusion switch.
Once the chassis is opened, the system will record and issue a warning message.
To clear the warning message, set the item to [Reset], then it will return to [Enabled]
later. [Options: Disabled, Enabled, Reset]
Save & Exit
▶Discard Changes and Exit
Exit BIOS setup without saving any change. This it is used to abandon all changes and
exit BIOS setup.
▶Save Changes and Reboot
This item is used to save all changes and reboot the system.
▶Save Changes
This item is used to save current changes.
▶Discard Changes
This item is used to discard current all changes and restore to the previous values.
▶Restore Defaults
This item is used to restore/ load all default values by the BIOS vendor.
▶Boot Override
The installed boot-able devices will appear on this menu, you can select one of them be
a boot device to start booting.