MSI A88XM GAMING - Manual (Page 69)

Chapter 3
3-9 BIOS Setup
USB Configuration
Sets the onboard USB controller and device function. Press to enter the sub-
menu.
USB Controller [Enabled]
Enables or disables the onboard USB controller.
XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI
hand-off feature.
EHCI Hand-off [Enabled]
Enables or disables EHCI hand-off support for the operating system without EHCI
hand-off feature.
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
Onboard USB3.0 Controller [Enabled]
Enables or disables the external USB 3.0 controller.
Super IO Configuration
Sets system Super I/O chip parameters for COM port. Press to enter the sub-
menu.
Serial (COM) Port 0 Configuration
Sets detailed configuration of serial(COM) port 0. Press to enter the sub-
menu.
Serial (COM) Port 0 [Enabled]
Enables or disables serial (COM) port 0.
Serial (COM) Port 0 Settings [Auto]
Sets serial port 0 (COM). If set to "Auto", BIOS will optimize the IRQ
automatically or you can set it manually.
Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
to enter the sub-menu.
EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013
regulation.
[Enabled] Optimize the system power consumption according to EuP 2013
regulation.
[Disabled] Disables this function.
Note: When enabled, the system will not support RTC wake up event functions.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶