MSI Z97 XPOWER AC - Manual (Page 80)

Chapter 3
3-14 BIOS Setup 3-15 BIOS Setup
Important
If you want to enter BIOS with enabled “MSI Fast Boot” mode or enabled "Fast Boot"
mode, you have to click the "GO2BIOS" tab on MSI Fast Boot utility screen or press
the "GO2BIOS" button (optional) on the motherboard. And then the system will enter
to BIOS setup directly at next boot.
▶Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press to enter the
sub-menu. This menu shows the iGFX Driver version for system information man-
agement. This sub-menu will appear when “Windows 8 Feature” is enabled.
▶Secure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press
to enter the sub-menu. This sub-menu will appear when “Windows 8
Feature” is enabled.
▶Secure Boot Support [Disabled]
Enables or disables secure boot support.
[Enabled] Enables the secure boot function and allow you to set the secure
boot settings.
[Disabled] Disables this function.
▶Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys
be loaded. This item appears when "Secure Boot" is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually load
the secure keys.
▶Key Management
Manages the secure boot keys. Press to enter the sub-menu. This sub-
menu will appear when “Secure Boot Mode” sets to [Custom].
▶Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press to enter the
sub-menu.
▶Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, and use these items to set the wake up
events.
[OS] The wake up events will be defined by OS.
▶Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.
▶Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the system
will automatically resume (boot up) on a specified date/hour/minute/second in these
fields (using the <+> and <-> to select the date & time settings).