KWorld UD165 - Manual (Page 5)

UD 165
5
3.After you connect the adapter, Windows will automatically complete the installation.
4.Once the installation is done, an extended screen will appear on the add-on monitor.
For Windows Vista, if the add-on monitor is blank, please reboot your system again.
If required, you can connect and disconnect the add-on monitor any time without
disconnecting the adapter from the USB port on your computer.
Notice for Window Vista users:
Windows Vista users will encounter a User Account Control dialog box when attempting to
install a program. Enter an administrator password or click Allow to start the installation.
When prompted with Windows Security dialog box, select Install this driver software
anyway.
2.Please select the language of user license and click on “I Accept” to install driver and
software automatically.
The equipped DVI-I (DVI-Integrated) connector transmits both the digital and analog
signals. This means it supports either of these three connection types:
It can be connected to a DVI-D (digital) monitor using a DVI cable (not provided). It can be
connected to an analog VGA monitor using the provided DVI-I to VGA adapter and a VGA
cable (not provided). Or, it can be connected to an HDMI monitor using the provided DVI-I
to HDMI adapter (not provided) and a HDMI cable (not provided).
To change the display mode, see next chapter for instructions.
• During the installation, it’s normal that the screen flicks black a couple of times.
• Sometimes it takes time for the add-on monitor to show the video.
DVI to VGA adapter
VGA Cable
Connect to VGA monitor
DVI to HDMI adapter
HDMI Cable
Connect to HDMI monitor
DVI Cable
Connect to DVI monitor