KWorld HyperMedia Center V3-5 - Manual (Page 9)

Note:
1. ATVR’s default frequency scanning range is dependent on country code set by Windows OS, but
scanning range might not be entirely correct. You should check and select a valid option for your
origin if necessary.
2. When re-configuring current TV frequency table at anytime, choose "Reset TV Option" from the
option menu by Right-Clicking on the display panel.
2.2 Setup Utility for ATVR
When clicking “Setting” button of Analog Basic Function, “Setup” windows will pop up.
2.2.1 TV Tuner Setup
TV Tuner setup property page allows users to customize and
configure TV channels or edit favorite memory channels. Cable or
antenna signal can be scan automatically for available channels or
manually label and identify favorite channels, as well as include
and/or exclude channels from the channel list. In channel list table,
channel settings can be changed by double clicking each column, like
video standard, MTS option, channel name and frequency fine tune.
z Normal Group: Switch TV source from antenna to cable or
vice versa.
z Memory Group: Users can assign any order of channel number
or video source they like.
z Auto Scan: Click the button to start Auto Scan function.
2.2.2 Preview Setup
The preview setup property page allows users to customize and
configure TV channels for channel surfing. There are two preview
options:
“Standard＂ and “Customized＂ At standard mode,
channel surfing by the order
z Standard
To select the Preview dimension: 2x2, 3x3, 4x4, 5x5
Preview time interval: Setting the interval time. The
minimized value is 2 sec.
z Customized : When choosing this function, settings of the
video source of each channel can be updated. By clicking on
the numerical keys, settings of the desired video source can be
chosen.
9