KWorld SA300-A HDMI - Manual (Page 9)

SA300
9
◎ Favorite Channel Setting
◎ Power Button
◎ To change video resolution
◎ To select the signal input
When the power is off, the machine is in standby situation. The signal of TV will transmit to
LCD through TVBox if the power is switched on.
When users press button, the resolution of 800x600, 1024x768, 1600x1200, 1360x768,
1280x720P, 1920x1080I, 1920x1080P, 1440x900, 1680x1050, 1920x1200 and 1280x1024 will
be changed automatically by loop on any video modes.
Note: Press button to use function menu to switch to all resolution. If your LCD does not
support this mode, for instance the screen shows “OUT OF RANGE” or “No Signal Detect”,
please press the button back to your optimum resolution.
There are several signal input modes in this TVBox. The sequence is as follows: TV/ AV/
S-Video/YPbPr/DVI. Press and it will be changed automatically by loop.
My favorite channel setting function provides 16 channels for setting your own favorite
channels. You can set your favorite channel through your remote control unit.
1. Select the channel and then press button on the remote control. Then, Favorite Mode
will be activated. When in “Favorite Mode”, you can use to change favorite channels by
loop.
2. When in “Favorite Mode” , Press will add or remove channels to “Favorite channels”
3. Press button again, it will deactivate Favorite Mode.
4. When you want to watch your favorite channel, press the “ ” button to activate “Favorite
Mode” and then press to change your favorite channels.
5. You can find the channel information on the top-left of screen. In TV mode, if you change
channel to a favorite channel , you will find a on the right side. In “Favorite Mode”, the is
on the left side.
3.2 Convenient Remote Functions
82164-30011-00000-G 說明書 SA300 KW ENG.indd 9 2008/9/23 下午 03:25:14