KWorld SA230 - Manual (Page 16)

© 2009 KWorld
16
6.3 PIP can function normally at the following PC display modes
Resolution Refresh Rate
800X600 60Hz 75Hz
1024X768 60Hz 75Hz
1280X1024 60Hz 75Hz
1440X900 60Hz
6.2 PIP part
Failure Cause and action
After PIP turned on, sound
is normal but no picture
display.
Check if the output mode of video card in PC is standard (see
section 3) – if the LED is on.
PIP invalid Check if there is PC signal input.