KWorld SA230 - Manual (Page 10)

© 2009 KWorld
10
Menu I: Picture
FOUR
Menu Description
4.1 Menu Description
Menu II: System
Menu III: Display setup
•Contrast, brightness, Chroma, and
Sharpness can be adjusted from 0 to
100 (Note: Sharpness option can be
displayed only if the video input is NTSC
system signal.)
•There are two options, ON and OFF, for
noise reduction. Select “ON” to reduce
the noise in picture.
•Picture. Sys: select your TV picture
system in your area. The default is
“AUTO”.
•Source: Adjusting input source. You can
change the input mode of the product.
There are four kinds of input source: TV,
video, S-video and YPbPr.
•Blue Screen: Adjusting Blue Screen ON/
OFF. You can turn on or turn off blue
background at no signal state.
•CH Preview: allows you to set the
number of pictures you want to preview,
and there are 9 and 12 available.
•Display Set: please refer to Menu III for
Display Setup
•Auxiliary: the auxiliary option includs four
sub items: see Menu IV for details.
•Output Mode: Adjusting Output mode.
You can change the resolution and
refresh rate of picture output.
•Aspect Ratio: change picture aspect
ratio.