KWorld SA230 - Manual (Page 12)

© 2009 KWorld
12
Menu VII: Timing
Menu VIII: OSD
•Timer OFF: used to set the time for
shutdown. It shall be changed to “on”.
•Timer ON: used to set the time for
startup. It shall be changed to “on”.
•Valid time: used to set the valid time of
your setting as once or every day.
•Startup Mode: used to set the mode for
each startup, which can be set as video,
S-video or TV.
•Language: Select the language for OSD.
•Style: set the style of menu, including
classic, modern and romantic.
•Horizontal: adjust the position of the
menu on screen in left or right direction.
•Vertical: adjust the position of the menu
on screen up or down.
•Display Time: adjust the display time of
the menu on screen.
4.2 Program searching
• Connect the antenna plug for CATV or antenna TV to the ANT IN port of this product.
• Enter into Tuning menu. Click VOL+ to enter into Tuning menu. Select Auto and click
VOL+ to start auto searching.
• If the noise level is too high at a certain channel and you do not want to keep it, you can
enter into TV Tuning menu to select CH. Skip and the channel will be deleted.
• You can use CH. Swap option in TV Tuning menu to arrange TV programs. For example,
CCTV-8 is now located in channel 8 and you want to change it to channel 1, you can do
the following operation:
a.select CCTV-8
b.enter into TV Tuning menu
c.select CH swap option
d.change the channel number from 8 to 1, and then click Menu button.
Similarly, you can change other channels such as CCTV-12 from channel 12 to channel 2.