Confidential – KMW Communications AICM User Manual

Page 9

Sheet 9 of 17

Sheet 9 of 17 05-30-2006

CONFIDENTIAL

Antenna information per sector: Antenna formats are selectively displayed according to the types of

antenna installed. There are 4 different types of antenna (Tilting#1, Tilting#2, Steering, and Width). The

type and the model are defined in Table 1. A related antenna control button will be activated.

Ant. Install LED: A blue LED turns on when an antenna was installed at each sector. If not installed, the

LED turns off.

Motor Busy LED: A yellow LED turns on when the program receives a motor busy message from AICM,

that is, the motor is currently running.

Motor Alarm LED: A red LED turns on when a motor runs and some errors occur. A green LED turns on

for a normal case.

A Tool bar

3) Tool bar: This is a shotcut for the Menu function.

a. Set Pattern Data:

b. Port Set:

This is for the Serial Port setting, but the initial setting is fitted to the protocol after the program

installation. Refer to Figure 5-3.

c. Port Open:

This is for the Serial Port open, the default setting is OPEN state.

d. Port Close:

This is for the Serial Port close.

e. Console (Data Log):

It displays the data TX/RX status. Refer to Figure 5-4.

Download:

g. Input:

h. Set Device:

Set GMT Time:

About:

A Port Properties window