KMW Communications AICM - Manual (Page 10)

Sheet 10 of 17 Sheet 10 of 17 05-30-2006
CONFIDENTIAL
6. An Antenna Information Setting
After installing of the AICM properly, a user must set the antenna information.
Display the TX/RX
Data format
Clicks the Input menu of Figure 6-1. The dialog-box shown in Figure 6-3 pops up.
A serial number is determined when a product is shipped. The NMS Application sets ID according to the
database. A user sets an antenna type and model of each sector.
Clicks the Set Device menu of Figure 6-2. The dialog-box shown in Figure 6-4 pops up. A user can input
AICM IP Address, Gateway, Subnet Mask and NMS Server IP Address.
Table 1 shows the information of antenna type and model KMW has currently. The number of Tilting1 ~
Width column means a degree.
Copyright © 2006 KMW Inc., All Rights Reserved