iRobot Scooba 300 Series - Manual (Page 13)

global.irobot.com
EN
General Troubleshooting
Refer to the table below to resolve Scooba’s problem.
Problem Possible Cause What To Do
Scooba will not
power on
Power is off Press Power, then press Clean to start
Scooba.
Battery is not charged Charge Scooba’s battery (see page 9).
Battery is not correctly
seated
Remove battery and ensure that battery
tabs are placed inside Scooba’s guide
holes before closing Scooba’s tank.
Warning Light is on Refer to Warning Light troubleshooting
(see page 11).
excessive foam
coming out of
Scooba
There is too much
cleaning solution
concentrate in Clean
tank
empty and rinse the Clean tank
thoroughly. When re-filling, make sure to
use only 7 ml of Scooba cleaning solution
and to fill the Clean tank completely to
the rim with water.
Cleaning head sticks
out of Scooba, will
not engage
Cleaning head is not
closed tightly over the
brush
With the tank open, slide the cleaning
head out of Scooba. Squeeze the cleaning
head completely closed over the brush
before re-inserting it into its proper
location (see page 6).
12