iRobot Scooba 400 Series - Manual (Page 14)

14 Scooba 400 Series Owner’s Manual
EN
Charge Scooba
Before using Scooba, charge it up by following these steps:
1. Plug one end of the battery charger into Scooba and the other end into an outlet.
2. Let the battery charge for eight hours (before first-time use only).
3. Once Scooba is fully charged, unplug the battery charger from the outlet and then
from Scooba.
Insert battery
Follow these steps to insert the battery:
1. Place Scooba upside down on a flat surface.
2. Locate the battery cover. Turn each knob to the
“unlocked” position, using a coin if necessary.
3. Remove the battery cover.
4. The battery has a bump at the center of one
side. Align the bump with the slot in the wall of
the battery compartment. Push the battery down.
5. Reinsert the battery cover. Turn each knob to
the “locked” position.
Use only authentic batteries supplied by iRobot. Use of third-party batteries will
void your warranty and may cause property damage or injury.
Getting Started
+ + + +
Unpack box
Your package includes the
Scooba robot, iRobot Hard Floor
Cleaning Solution concentrate,
rechargeable battery, battery
charger and Virtual Wall
® device.