Cirrus Logic AN278 - Manual

1
Copyright © Cirrus Logic, Inc. 2007
(All Rights Reserved)
http://www.cirrus.com
AN278
Cirrus Power Measurement Evaluation GUI
Installation Guide
Cirrus Power Measurement Evaluation GUI (graphical user interface) is a software tool controlling Cirrus
Power Measurement Evaluation boards through a USB interface.
The GUI can be obtained from www.cirrus.com/industrialsoftware .
1. GUI Installation
1) Go to the Cirrus Industrial Software download web site ( http://www.cirrus.com/industrialsoftware ).
2) Click the link for the GUI desired.
3) Download the file onto the PC and unzip it. A folder called distribution will be created ( for example,
C:\distribution )
4) Open the folder and run the setup.exe file ( C:\distribution\setup.exe ).
5) If the GUI has been installed previously, the Uninstall wizard will remove the older version (see below).
6) If applicable, after uninstalling the older version, run setup.exe again.
7) Follow the instructions presented by the installation wizard.
8) To run the GUI, go to:
Start
B
Programs
B
CDBxxxx
AUG ‘07
AN278REV2