WIKA OLS-C20 - Manual (Page 5)

WIKA operating instructions mini limit switch, model LSO.02 5
13334591.02 10/2010 GB/D/F/E
GB
1. General information / 2. Safety
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.
DANGER!
...identifies hazards caused by electric power. Should the safety instructions
not be observed, there is a risk of serious or fatal injury.
WARNING!
... indicates a potentially dangerous situation that can result in burns, caused
by hot surfaces or liquids, if not avoided.
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the appropriate
instrument has been selected in terms of measuring range, design and
specific measuring conditions.
Non-observance can result in serious injury and/or damage to equipment.
Further important safety instructions can be found in the individual chapters of
these operating instructions.
2.1 Intended use
This instrument is designed to detect limit levels of liquids. The values given in chapter
"3. Specifications" must not be exceeded. The mini limit switch is not suitable for milky,
turbid, outgassing, sticky and crystallising media.
The mini limit switch has been designed and built solely for the intended use described
here, and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the mini limit switch outside of its technical specifications
requires the instrument to be shut down immediately and inspected by an authorised WIKA
service engineer.