WIKA TFS35 - Manual (Page 4)

4
GB
11610115.03 11/2012 GB/D/F/E
WIKA operating instructions model TFS35
1. General information
1. General information
„ The bimetal temperature switch described in the operating instructions has been
designed and manufactured using state-of-the-art technology. All components
are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
„ These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
„ Observe the relevant local accident prevention regulations and general safety
regulations for the instrument's range of use.
„
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
„ Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
„ The manufacturer's liability is void in the case of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insufficiently qualified skilled personnel or unauthorised modifications to
the instrument.
„ The general terms and conditions contained in the sales documentation shall apply.
„ Subject to technical modifications.
„ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: TV 35.01
- Application consultant: Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-mail: [email protected]
Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or
death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or
damage to the equipment or the environment, if not avoided.