WIKA WUR-1 - Manual (Page 16)

GB
WIKA operating instructions attachable indicator, models A-AS-1, WUR-1 16
2437704.05 10/2012 GB/D/F/E
6. Commissioning, operation
Indication SP1
out1
SP2
out2
Setting switching points and switching functions
■ Press and hold button 1 for two seconds. The display changes to "SP1".
■ Using buttons 2 and 3, select the required switch point for switching output 1.
■ Confirm the unit set, using button 1. The display reverts to "SP1".
■ Briefly press button 1 in order to bring up the menu point "out1".
■ Using buttons 2 and 3, select the required switch function for switching output 1.
off = always off
on = always on
no = normally open nc = normally closed
■ Confirm the switch function set, using button 1. The display reverts to "out1"
■ Briefly press button 1 in order to bring up the menu point "SP2".
■ Using buttons 2 and 3, select the required switch point for switching output 2.
■ Confirm the unit set, using button 1. The display reverts to "SP2".
■ Briefly press button 1 in order to bring up the menu point "out2".
■ Using buttons 2 and 3, select the required switch function for switching output 2.
off = always off
on = always on
no = normally open nc = normally closed
■ Confirm the switching function set using button 1. The display reverts to "out2".
Set switching point 1
Confirm
Select switching
function 1
Confirm
Set switching point 2
Confirm
Select switching
function 2
Confirm
2 s