Kramer Electronics PT-100 - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Wiring the Twisted Pair Connectors
8
6 Wiring the Twisted Pair Connectors
When using STP cable, connect/solder the cable shield to the RJ-45 connector
shield.
Table 2 and Figure 4 define the TP pinout using a straight pin-to-pin cable
with RJ-45 connectors.
Table 2: TP Connector Pinout
Figure 4: TP Connector
EIA /TIA 568A EIA /TIA 568B
PIN Wire Color PIN Wire Color
1 Green/White 1 Orange/White
2 Green 2 Orange
3 Orange/White 3 Green/White
4 Blue 4 Blue
5 Blue/White 5 Blue/White
6 Orange 6 Green
7 Brown/White 7 Brown/White
8 Brown 8 Brown
Pair 1 4 and 5 Pair 1 4 and 5
Pair 2 3 and 6 Pair 2 1 and 2
Pair 3 1 and 2 Pair 3 3 and 6
Pair 4 7 and 8 Pair 4 7 and 8
7 Technical Specifications
Table 3 includes the technical specifications
1
of the PT-100, XGA Line Extender.
Table 3: Technical Specifications of the PT-100 XGA Line Extender
INPUT: 1 CAT 5 IN on an RJ-45 connector
OUTPUT: 1 CAT 5 OUT on an RJ-45 connector
RESOLUTION: Up to WUXGA and 1080p
S/N RATIO: VIDEO: 58dB unweighted, 68dB @5MHz weighted
Audio: <-80dB
CONTROLS: Equalization trimmer
Level trimmer
COUPLING: AC
POWER SOURCE: 12V DC 900mA
DIMENSIONS: 6.2cm x 5cm x 2.4cm (2.44" x 1.97" x 0.94") W, D, H
WEIGHT: 0.2kg (0.44lbs) approx.
ACCESSORIES: Power supply, rack ears
OPTIONS: RK-4PT, RK-1TPT, RK-1T2PT 19” rack adapter
1 Specifications are subject to change without notice