Kramer Electronics 622T - Manual (Page 12)

622T, 622R - Connecting and Operating the 622T, 622R 9
Do not look directly into the LC receptacles of the 622T, while
powered on, although this product is regulated strictly enough to
operate under the Laser Class 1, classified by CDRH/FDA for eye
safety.
5. Connect the DDC RJ-45C connector on the 622T to the DDC RJ-45C
connector on the 622R, via UTP cabling (see Section 5.3 ).
6. Connect the 12V 2.1A DC power adapter to the power socket of either the
622T or the 622R and connect the adapter to the mains electricity (not
shown).
Alternatively, connect the separate power supplies to the transmitter and to the receiver
simultaneously.
7. Turn the power on the source and the display to ON.
Figure 4: Connecting the 622T, 622R Dual Link DVI Optical Transmitter/Receiver
!