Kramer Electronics WP-4iR - Manual (Page 5)

Overview
3
3 Overview
The IR repeater—the Pico TOOLS PT-4 iR or the Wall Plate WP-4 iR 1 lets
you control up to four machines 2 via their remote control transmitter from a
distance.
In particular, the IR repeater:
Can operate at a distance of approximately 75 meters 3 (between the
controlled machine and the IR repeater)
Allows operation of machines that are stacked away in closets, cabinets,
and even other rooms
Has an IR sensor
Is 12V DC fed
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer PT-4 iR and
WP-4 iR away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
4
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 Available in three versions: one for the USA, one for Belgium and Germany, and one for the UK and most of Europe
(excluding Belgium and Germany)
2 For example, a video player, DVD player, air conditioning system, and any other remote controlled machine
3 By using the IR emitter extension cables (see Table 3)
4 For example: model number AD2512C, part number 2535-000251