Kramer Electronics SV-552ALC - Manual (Page 12)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Virtual Device – an Application Example
10
Figure 8: Sending and Receiving Commands
Important – The Master RC can send mostly button status/lighting and text field commands to its K-
Net Aux devices. However, the competent developer can easily use a combination of virtual buttons
defined as a property of the Virtual Device in K-Config and use these messages as global variables
and other powerful options to enable application flexibility.
For example, Button #15 in Virtual Device #12 is not seen on the Virtual Device application.
Instead, its color status is changed as part of the K-Config action lists and it is used a global
variable. The Virtual Device application will check it when needed (If BTN15=BLUE then…., If
BTN15=RED then…).