Kramer Electronics SV-552ALC - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
The Virtual Device – an Application Example
8
3.4.2 Sending and receiving Data to/from Master RC
The Master RC broadcasts its outgoing Protocol 3000 messages on the K-NET bus. All its data
messages are sent to all the K-NET devices that are connected to it. Each K-NET Auxiliary Device
should execute only commands that match its K-NET ID. All the Other commands must be ignored,
see Figure 8 .
Depending on the Master RC in use, up to two Virtual Devices with reserved K-NET ID of 11
and 12 can be used.
The K-Net ID of a Virtual Device is defined in K-Config as a property of the K-Config Virtual
Device triggers layer.
Figure 7: Receiving data from the Room Controller Flow Chart