Kramer Electronics VS-106 - Manual (Page 5)

Overview
3
3 Overview
The VS-106 is a switcher/amplifier for unbalanced analog audio stereo
signals. The unit mechanically switches the single line input to one output,
either one of ten unpowered unbalanced audio stereo line outputs, or one of
six amplified speaker outputs. The unit does not switch to line and speaker
outputs simultaneously.
More specifically, the VS-106 features:
• Unpowered 1x10 mechanical line to line switching
• Amplified 1x6 line to speaker switching
• A loudspeaker volume knob
• A power ON indication LED
• A 12V DC power supply
• Standard 19” 1 U rack mount size
To achieve the best performance:
• Use only good quality connection cables
1
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables).
• Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
VS-106 away from moisture, excessive sunlight and dust
4 Your VS-106 16 Output Audio Selector/Amplifier
Figure 1 and Table 1 define the unit.
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com