Kramer Electronics VS-406 - Manual (Page 5)

Overview
3
3
3 Overview
The VS-406 is a switcher/amplifier for unbalanced analog audio stereo
signals. The unit mechanically switches the single line input to one output,
either one of ten unpowered unbalanced audio stereo line outputs, or one of
six amplified speaker outputs. The unit does not switch to line and speaker
outputs simultaneously.
More specifically, the VS-406 features:
• Unpowered 1x10 mechanical line to line switching
• Amplified 1x6 line to speaker switching
• A loudspeaker volume knob
• A power ON indication LED
• A 24V DC power supply
• Standard 19” 1 U rack mount size
To achieve the best performance:
• Use only good quality connection cables 1
• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer VS-406
away from moisture, excessive sunlight and dust
to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
4 Your VS-406 Audio Selector/Amplifier
Figure 1 and Table 1 define the unit.
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com